+ 86 17321233616

Kieli

  • English
  • Spanish
  • Arabic
  • French
  • German
  • Japanese
  • Portuguese
  • Korean
  • Thai
  • vietnam
  • Indonesian
  • persialainen
Etusivu » tuotteet » Apulaitteet
Apulaitteet

    Tukiasema

    DB316, DB316-POE
    Elabelsin ja Hubin väliseen tietojenvaihtoon.

    Ota nyt
    • Kuvaus
    • määrittely
    • tiedustelu

    Product Introduction

    DB316 on kolmannen sukupolven langaton tukiasema.

    Se on uusi aktiivinen RFID-kiinteä tukiasema, joka toteuttaa kaksisuuntaisen tiedonsiirron isäntäjärjestelmän ja uusien elektronisten hintatunnisteiden välillä.

    Se on valmistettu SunpaiTag Electronic Shelf Label -järjestelmälle ja muille tuotteille.


    SunpaiTagin elektroninen hintatietojärjestelmän yleiskuvaus


    Electronic Shelf Label -järjestelmä koostuu suorituskyvystä, palvelimesta, kytkimistä, tukiasemista, puhelimesta ja ohjelmistosta.

    Tietokannassa oleva tuotetieto kopioidaan isäntätietokoneelta elektroniseen hyllymerkintäjärjestelmän sovellusohjelmaan;

    Sitten päivitetyt hinnat tai muut tiedot lähetetään Ethernet (tai sarjaportti) kautta tukiasemille, jotka sitten siirtävät päivityksen koko tallennukselle 2.4GHz langattoman lähetyksen kautta.


    Ominaisuus ja käyttö

    Pääominaisuudet: Langaton tiedonsiirto ESL: llä (nimeltään: elektroninen hintalappu), helppo asennus, etikettien käyttö, suuri signaalin peittoalue ja tukee monia tarroja.

    Liitäntä: TCP / IP-yhteys ESL-palvelimeen, 2.45GHz ISM ESL-tarroilla.


    etiketti Nimi Käyttää
    RX Receive Data LED Valo, kun tietoja ESL: stä vastaanotetaan
    TX Lähetä Data-LED Syttyy, kun tukiasema lähettää tietoja ESL: ään
    SYS System status LED Indicates normal system status when flashing once per second
    PWR Virran merkkivalo Lights when Base station powered
    DC6V Virta Port 6VDC Power Connection(DC plug socket)
    LAN Network Port Network cable into Base station
    EXT Expansion Por Port to connect one additional Base station

    Compared with base stations of similar nature the DB316 wireless base station has an attractive appearance, ease of installation, and has good structural design, with an IP53 protective environment rating.

    Liitäntä: TCP / IP-yhteys ESL-palvelimeen, 2.45GHz ISM ESL-tarroilla.


    Base Station Installation


    Menetelmä Virtalähde Kuvaus Liitännät
    Border 1 Virtalähde When the switch does not provide power and external power is required Provide 6V to DC6V socket Connect Ethernet to LAN PORT
    Border 2 POE Switch provides power via Ethernet port Connect POE Ethernet to LAN Port
    Border 3 Cascade DB316 Base station provides power to next Base station using POE (do not cascade more than one extra Connect POE Switch to LAN Port and connect Base station to EXT Port on second Base station


    Power Supply and Networking Shown in the below figure the DB316 can be powered in three ways:

    Installation Conditions

    Before Installation Check that the product is intact and all attachements arecomplete, if there is damage or missing parts please contact Sunpai Tag promptly.
    Check whether the following installation conditions exist before continuing:
    A) Installation will meet applicable workplace standards.
    B) Complete the required Installation processes.

    Asennuspaikka

    The choice of Base Station position depends on its installation, it should be where possible, in a place free of obstacles that is safe and easy to operate.
    The DB316 Base Station can be mounted on the ceiling and or walls depending on.

    Asennustapa

    Before Installation: Configure all Base Station IP Addresses (refer software manual for instructions for this step).
    Installation: the Base Station secures with Phillips pan head self-tapping screws connect power cable and Network cable. Typical installation Figures 3-1 and 3-2

    The Frame is the building outline, the view is from the top down with the viewof all the Black dots (which are Base Stations) on the ceiling of the building;
    The Round dotted line circles are the Base Station signal coverage areas, typical coverage depending on the environment is between 15m to 50m in a simple open environment for a single Base Station.

    Figure 3-2 shows the inter Base Station installation distance, the dotted line represents the Base Station wireless signal coverage area;
    Ensure the distance betwen base stations is less than or equal to 20m.


    Varotoimet

    1. The DB316 power supply shipped has an input range of 100V to 240Vac 360mA please ensure it is able to be supplied with the correct voltage.
    2. Ensure that equipment is grounded.
    3. Check the Base Station and antenna installation position and orientation with respect to the ESL that will be exchanging data.
    4. This product radiates Radio Frequency (RF) energy, the installation andcommissioning personnel should leave at least 30cm between themselves and theantenna in order to meet the FCC requirements for human exposure.
    5. Any radio transmitting equipment, inlcuding this Base Station, can beinterfered with by medical devices without proper protection. If there are problemsseek the medical device manufacturer for advice.
    6. This equipment may cause interference with other electronic devices.


    Key Performance Areas

    Uses 2.4GHz frequency within ISM band, worldwide compatibility Electronic shelf label proprietary wireles protocol to ensure data securitySupports Power over Ethernet(PoE) application e-tagindependent research to specifically support electronic shelf label the ability to cascade Base Stations to reduce installation complexity and cost.

    Lämpötila-alue -10°C to +55°C (14°F to +131°F)
    Kosteusalue 20%: sta 95%
    Syöttöjännite AC/DC Adapter. Base Station Input Voltage 6VDC, 2.5A
    Modulaatio GFSK
    Taajuus 2.4 to 2.4835GHz
    Lähetysteho 15dBm
    vastaanotin Herkkyys [Sähköposti suojattu]% BER
    Antenni VSWR ≤ 1.5:1
    viestintä Etäisyys 15m on 50m
    liitäntä TCP / IP connection with ESL server, 2.45GHz ISM with ESL labels
    Virtalähde DC6V, 2.5A Supports 802.3af POE Power Supply
    Valmiustila Nykyinen 650mA
    Liiketoiminnan Nykyinen 800mA
    Verkkoliitäntä 10/100M Ethernet UDP Protocol
    Expansion Interface 10/100M Ethernet expansion port for a single Base Station extension
    IP-luokitus IP53
    Maximum communication distance 30-50 meters (Line of Sight and open environment)

    Base Station Antenna Radiation Pattern

    Online tiedustelu

    Voit vapaasti antaa oman tiedustelun muodossa below.We Vastaamme sinulle 24 tuntia.

    valikko