EN
AR
FR
DE
IT
JA
KO
PL
PT
RO
RU
ES
SV
ID
SR
SK
UK
VI
HU
TH
TR
FA
GA
BE
AZ
MN
When placing the Sunpaitag ESL on shelves, following these steps is key to ensuring safety. First, hold up and measure the shelf so you can gauge whether it will work. Then secure the ESL to the shelf with screws or brackets. Ensure the esl system is 'rolling' on the ground with all shocks in the propper location prior to tightening any of the screws. Then you can test the ESL to make sure it's safely rooted and properly working. Finally, consider adding support for more heavyweight ESL units.
Heavy-weight ESL units:
Before you get going, measure the space on the shelf. This allows you to ensure the ESL fits correctly and does not extend too far off the device. You can measure how wide and deep the shelf is with a ruler or measuring tape. Jot your measurements down so that you'll remember them.
ESL with screws or brackets:
Once you’ve measured, it’s time to fasten the Sunpaitag ESL to the shelf. Secure the esl display with screws or brackets. Be sure to centrally position the ESL on the shelf to even the load. But to the extent that you can get it where you want and use a screwdriver to tighten the screws or brackets, you’re doing it right. Inspect ESL is level and tighten then it should be seated straight.
Attaching the ESL:
After attaching the ESL and ensuring that it's level, test it to ensure that it's secure and functioning. Open the ESL and verify that the images or text are shown correctly. If nothing is happening, see if there are any connections and make sure everything is connected good.
ESL more tightly:
If you have a more cumber some ESL unit, consider adding extra support. This keeps the esl shelf from falling off the shelf. You can also use more screws or use brackets installed to secure the ESL more tightly. Re-test the display after fitting the additional support to make sure it still works.
Summary:
So in sum, when you set up the Sunpaitag ESL on shelves, just accurately measure the slot, hook it with screws or brackets, make it level, do not forget to switch the display on and think about additional support if the unit you place on is a heavy one. Then your ESL displays will be safe and effective on the shelves.
